Prok Sea-Doo 951 Flame Arrestor
This Proven design has contributed to Five World Championship Titles and Three World Records! Stainless steel free flowing mesh element - 230.3 cfm* Large clear parabolic cone directs and strengthens air signal to intake, amplifying air volume and velocity. Ultra-light design saves fatigue and vibration on intake system. Rubber base of the Multi-Fit clamps around any the stock adapter flange on the Sea-Doo 951cc carb engine, no adapter is needed.
NOTE: We also recommend our flame arrestor prefilters to block water ingestion.
INSTALLATION: Sea Doo 951/Ltd's install by removing the solenoid air box vacuum hose, leave the solenoid unplugged and slide the airbox to the rear of the watercraft. Remove the o-ring and plastic split washer from the stock throttle body flange and attach Prok to stock mounting flange. You can double check by looking down through the top of the filter. Slide the filter(s) onto the throttle body, if snug as the Multi-Lok's will be, use some soapy water (Windex) to help seat the filter. Once in place tighten the hose clamp around the arrestor flange with a spade screwdriver or 9/32 (7mm) drive socket.
CARE: Do not spray the flame arrestor with a contact and/or brake-cleaning agent. Washing and caring for your flame arrestor should be done with dish washing detergent.
WARRANTY INFORMATION: Please contact Prok for missing or if you think you have the wrong flame arrestor on your PWC. If you have a failure or concern regarding the reliability of your Prok flame arrestor please contact Prok immediately at firstname.lastname@example.org. Prok stands behind all of their products. MARINE SAE J-1928 COAST GUARD APPROVED.