Honda Aquatrax R-12X '05-07 Boarding Step
The spring-loaded stainless steel step stays in the upward position until needed for added safety benefits. The step features a soft marine foam covering for your non-slip protection and grip. It comes completely assembled but requires 8 x 25 Flange bolts (stainless steel is recommended) which are not included. These can be purchased at a local hardware store.
The 2005 - 2007 Honda Watercraft used two different style rear decks which use two different step mounting brackets. To determine which style you have you will need to measure the plugs on the rear of the watercraft vertically from center to center (see image) and then select your style from the drop-down menu. Your measurement will be either 3 1/4" (Flat Hull) or 2 5/8" (Angled Hull).
Fits The Following Models:
- 2005 Honda Aquatrax R-12X Boarding Step
- 2006 Honda Aquatrax R-12X Boarding Step
- 2007 Honda Aquatrax R-12X Boarding Step
Note: This item is not included in our "Free Shipping" offer. Generic images and may not depict your actual boarding step. This is a Non-Returnable Item.