Performance Pump Cone

The performance pump cone replaces the stock plastic pump cone on Yamaha GPR, XLL & XLT jet pump vein housings. The asymmetrical up sweep of the cone precisely matches the 5-degree angle of the GPR'S compression nozzle significantly reducing cavitation and improving bottom end punch, midrange pull and overall performance. Constructed of cast aluminum and coated to prevent corrosion. Includes necessary hardware and instructions for easy installation

Part Number	Application	Our Price
19-0892	R&D - GP1200R / GP800R Perf. Pump Cone	Click Here
19-0893	R&D - XLL/XLT Performance Pump Cone	Click Here
19-0891	R&D - VX 110 Perf. Pump Cone	Click Here

TBM Racing Yamaha Super Pump Cone

Introducing the long awaited Yamaha Super Pump Cone. As soon as we released the Kawasaki Super Pump Cone Yamaha owners started calling asking if we would design a similar part for the Yamaha, so we did. Offering the same performance benefits as our Kawasaki Super Pump Cone our Yamaha version will transform your inefficient OEM pump into a high performance large diameter hub race pump. We have incorporated the new design features of our Kawasaki Super Pump Cone "Pro" into this part as well as one more outstanding feature. It is not necessary to run a large hub impeller, so there is no need to purchase a new impeller to benefit from our Yamaha Super Pump Cone. We have designed our Yamaha Super Pump Cone to accommodate any diameter hub impeller. An OEM, standard aftermarket, or C-75 Magnum impeller will work with this set up.

Three sizes of our interchangeable tail cone tips are included with this kit. Outstanding for racing, freestyle, or freeride applications. The Yamaha Super Pump Cone will work on any year Yamaha Super Jet, Wave Blaster, or other Yamaha models that utilize the 144mm pump housing.

Note: This is an outstanding alternative to purchasing an expensive aftermarket pump and we have seen amazing results in a Limited class application.

Part Number	Application	Our Price
TBM120-YAM	*TBM Racing Yamaha Super Pump Cone*	Click Here

TBM RACING SUPER PUMP CONE "Pro" (Kawasaki 750/800)

Introducing the most revolutionary pump component ever released for the Kawasaki stand ups. We have turned our dream into reality by designing a component that transforms the inefficient OEM pump into a high performance race pump. Over two years of development has gone into this design and literally hundreds of prototypes have been tested before we settled on this configuration. We have increased the hub diameter of the OEM pump, which creates an increase in pump pressure keeping the pump "loaded" in rough water conditions. The increased efficiency adds amazing acceleration, improved handling and top speed. The Super Pump Cone is designed to be used with the OEM, Solas Dynafly, or C-75 Skat-Trak impellers in standard, or a 5mm set back. Installation is as simple as changing an impeller and can be performed with standard tools. Fits '92-'05 Kawasaki 750/800 stand ups.

*Due to the demands of Pro Racing we have redesigned our Kawasaki Super Pump Cone to increase the strength and offer our riders with the option to "tune" the pump for their particular set up or water conditions. Included with our "Pro" kit is the Super Pump Cone insert, a tail cone base that seals the pump and three different length tail cone tips. The tail cone tips can be changed by simply removing one M6 bolt and replacing the tip with a different length to optimize your impeller and nozzle combination. The short cone works well for Freestyle, Freeride and tight Closed Courses, while the medium and long tail cone works excellent for rough water hook up and amazing top speed.

Note: This is an outstanding alternative to purchasing an expensive aftermarket pump and we have seen amazing results in a Limited class application.

Part Number	Application	Our Price
TBM120	TBM RACING SUPER PUMP CONE "Pro" (Kawasaki 750/800)	Click Here

TBM Racing Freestyle Tail Cone - (Compatible only with our Super Pump Cone)

TBM Racing Freestyle Tail Cone

Compatible only with our Super Pump Cone. Designed as a replacement tail cone for our Super Pump Cone, offering the freerider, or freestyler that added acceleration they desire. The short tail cone is not recommended for closed course racing, although could be a secret weapon on a small tight track.

TBM Racing Long Tail Cone

Compatible only with our Super Pump Cone. Designed as a replacement tail cone for our Super Pump Cone, offering the racer, or rec rider that added top speed they desire. The long tail cone is recommended for closed course racing, and will increase hook up in rough water conditions.

Part Number	Application	Our Price
TBM120-FS	TBM Racing Freestyle Tail Cone	Click Here
TBM120-L	*TBM Racing Long Tail Cone*	Click Here

WET WOLF Adjust-A-Thrust - Self Adjusting Pump Cones

The Adjust-A-Thrust is simple to install and easy to tune. Installation on most models takes less than an hour. Initial tuning takes half an hour at your favorite lake. The Adjust-A-Thrust constantly shifts back and forth, changing the size of the pumps exit nozzle automatically. For maximum low end, the center shuttle is retracted, opening up the nozzle and allowing a large volume of water to be moved to accelerate the craft. As craft speed and pump pressure build, the tapered center shuttle is forced out into the exit nozzle, reducing its size and increasing water velocity, which increases top speed. Letting off the gas lets the shuttle backshift into low gear. The Adjust-A-Thrust is race legal in all classes except stock class. The Adjust-A-Thrust has been shown to affect top speed by as much as 3 mph. Typical gains are .5 to 1.5 more top end and better midrange.


Part No.	Applications	Our Price
21-6000	AAT PUMP CONE KAW 1100ZXI, STX, STXR, 12F, 15F	Click Here
21-6005	ATT PUMP CONE All 650 - 800 2 Bolt Cones (except ZXi)	Click Here
		Click Here


Part No.	Applications	Our Price
21-6080	AAT PUMP CONE YAMAHA 144,155mm GPR1200, XLT1200, FX140, GP800, GPR1300 '03-04	Click Here
21-6081	AAT PUMP CONE YAMAHA 155mm 75mm HUB GPR1300 '05-06, FX HO, FX160, VX110	Click Here
YAM1	AAT PUMP CONE YAMAHA 155mm Fits SJ 90-04, WRIII 91-97 GP700, VXR/VXR PRO, BLASTER, B2, ALL RAIDER 94-97 GP1200 97-99, VENTURE 1100, XL1200 98-99 .5 to 1.5 mph gain over the stock cone.	Click Here


Part No.	Applications	Our Price
21-6052	AAT PUMP CONE SEA-DOO ALL 155mm Pumps (except 4-Stroke) & 951 Engines	Click Here
21-6055	ATT PUMP CONE S-D All 4-Stroke Engines '01-06	Click Here


Part No.	Applications	Our Price
21-6022	AAT PUMP CONE '94-04 POLARIS With Pump Wedge	Click Here


Part No.	Applications	Our Price
21-6070	Skat Trak Pumps - Kaw & Sea Doo 75mm Hub Pumps	Click Here

WET WOLF FREESTYLE PUMP CONE

Specifically designed for low end performance • Allows engine to rev higher and faster • Perfect for the freestyle/freerider who wants that low end punch • CNC billet aluminum and anodized for corrosion resistance • Simple bolt-on design • Replaces the stock cone

Part No.	Application	Our Price
21-6100	All 650-800 kawasaki 2 bolt tail cones (except ZXI)	Click Here
21-6105	Skat Yamaha pumps, Polaris Octane and Solas pumps	Click Here
21-6110	Yamaha SuperJet	Click Here