|
  Building
upon the success of the single channel PWM Switch above, MSD has added
two more channels of programmable water injection. The Multi-Channel
system allows the engine builder to fine-tune the exhaust system for
maximum performance. Now you can have water injected at the exhaust
manifold, stinger, and water box or anywhere in between. Kit includes
Multi-Channel PWM Switch, 3 solenoids, fittings, wiring, tubing, and a
instruction manual. |
How
does it work? By injecting water into the pipe at low rpm the pipe
cools off and the sound wave slows down by making the pipe act longer,
thus producing better bottom end power. Limiting the water at high rpm
the pipe reaches greater temperatures and the sound wave speeds up
making the pipe act shorter, thus producing increased rpm and top
speed. 178 program settings.
A
MSD Pulse Width Modulated Water Injection System adds water at
programmable rpm points to tune the exhaust system to get peak
horsepower. Injecting water into the exhaust alters the sonic wave of
the exhaust - fooling the pipe into thinking it's longer. You will
benefit with more performance at low to mid-range rpms - getting you up
to speed faster. Kit includes: PWM Switch, solenoid, fittings, wiring,
tubing and a instruction manual.
Increase
holeshot power and mid-range acceleration with our electronically
controlled Riva Water Injection (R.W.I.) System. The R.W.I. System injects
water at lower RPMs to cool exhaust and produce a slower sonic wave for
greater torque. At high RPMs the water is shut off to let the sonic wave
travel faster for more top end horsepower. System features adjustable
injection controls to fine tune your combination. Kit installs easily and
delivers big results. Complete installation instructions included.
